Qingdao Knnjoo Machine Inc
Pioneer home & abroad with simple and plain faith Integrate knowing& doing with strong and firm belief
Add to Cart
HSK series Hook Wheel Shot Blasting Machine Shot Blaster for Automobile Parts Blast Cleaning
Hanger hook type Shot Blasting Machine description
The hook type shot blasting machine is divided into single hook and double hook. The hook type shot blasting machine uses two hooks to load workpieces into the shot blasting room alternately. Use a shot blasting machine to throw 0.2-0.8 shots to the surface of the workpiece to make the surface of the workpiece reach a certain roughness, make the workpiece beautiful, or change the compressive stress of the workpiece to increase its life. This model is widely used in the surface cleaning or strengthening treatment of medium and small castings and forgings in the casting, construction, chemical, electrical, machine tool and other industries. And this model is suitable for cleaning slender and thin-walled parts that are not suitable for collision. The hook type shot blasting machine is the standard model of the shot blasting machine. The diameter of the working cylinder is from 900 to 1300 mm, and the height is from 1300 to 2200 mm. The standard model has 2-7 blasting heads with a maximum load capacity of 10,000 kg. The production efficiency of this shot blasting machine is quite high, and the flexibility span is quite large. It is an ideal cleaning and strengthening equipment, and it is easy to operate. Just load the workpiece to be processed on the machine, press the start button, and go through a very In a short time (usually 5-7 minutes), the entire cleaning process is completed, and all dust and residual shots are removed. It is mainly suitable for the surface treatment of various medium and large castings, forgings, weldments, and heat-treated parts, including Fragile and irregularly shaped workpieces.
Technical data
| model | HSK 10/12SL | HSK 12/16SL |
| Maximum diameter of workpiece (mm) | 800-1000 | 1200-1500 |
| Maximum height of workpiece (mm) | 1200 | 1600-1900 |
| Maximum weight of workpiece (kg) | 500 | 1000 |
| Number of shot blasters | 2 | 2-3 |
| Single shot blasting machine power (kW) | 7.5 | 11 |
| Optional power (kW) | 11 | 15 |
Structure
The hook type shot blasting machine is a hook type cleaning equipment. It consists of a shot blasting room, a hoist, a separator, a screw conveyor, two shot blasting assemblies, a projectile control system, a hook walking track, and a hook system , Self-rotating device, foundation, dust removal system and electrical control part.
Work program
When the machine is working, when the preparation work (dust removal system, hoist, screw conveyor, etc.) is completed, the machine starts to work normally.
First, the hook descends to lift the workpiece, rises to a certain position, and then enters the shot blasting room along the track, and stops and starts to rotate when it reaches the predetermined position. At this time, close the gate of the shot blasting room, open the shot blasting device, and open the blasting gate, Start shot blasting the workpiece. Repeat this process until the work is completed and shut down in order. Work program: 1. Dust removal system operation
2. Hoist on
3. Screw conveyor on
4. Separator on
5. The hook loads the workpiece in the cleaning room, rises to a certain height, and stops after touching the travel switch.
6. The hook enters the cleaning room and stops when it reaches the predetermined position
7. The door of the cleaning room is closed and the hook starts to rotate
8. Open the shot blaster
9. The pill supply gate opens and the cleaning begins
10. After the workpieces on the hook are cleaned up, the gate for pill supply is closed
11. Shot blasting machine stops
12. Rotation stop of hook
13. The door of the cleaning room is opened and the hook is moved out of the cleaning room
14. The hook unloads the workpiece in the cleaning outdoor
15. Repeat steps 6. 7. 8. 9. 10.11.12.13.14 16. If you continue to work, go to step 5.
17. The pill supply brake and shot blasting device will automatically shut down, stop the hook rotation, stop the screw conveyor, stop the separator, stop the dust collector, and stop the whole machine. For a detailed description of the operation program of each actuator of the electronic control system, please refer to the electrical part at the back of this manual.
Our company
1. Qingdao KNNJOO Machine INC.is a manufacturer specializing in the design and manufacture of Shot Blasting Machines and Sand blasting chamber for decades over 20 years in China.
2. Qingdao KNNJOO Machine INC.is design, manufacture and install innovative, economical and high quality shot blasting equipment and provide ongoing customer support through technical assistance and spare parts.
3. Qingdao KNNJOO Machine INC. have the best worker to provide you with a professional shot blasting machines knowledgeable and reliable sales team in order to meet your specific requirements.
4. Through ongoing training and hands on experience our personnel are able to offer you the best advise, technical expertise and cost reduction solutions to improve your performance.